If you have a fire or water emergency, please call us now at (303) 777-6498

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

How To Flush Your Hot Water Heater in 5 Easy Steps

2/14/2020 (Permalink)

Man's hands unscrewing a screw-nut on a water heater with a wrench on a boiler A water heater flush can remove buildup that is in your water tank

How To Flush Your Hot Water Heater in 5 Easy Steps

Like any other appliance, a water heater often requires maintenance to keep it up and running in good condition. Water in Centennial, CO, carries natural minerals and sediment in it, including the following:

  • Sand
  • Calcium
  • Magnesium

These can easily get stuck in your tank, causing buildup and preventing the heating element in your tank from doing its job. Cleaning this home appliance does not have to be a difficult task. A water heater flush can be done in five easy steps.

Step 1: Cut the Power Supply

Whenever you are working with any appliance, you must be cautious and disconnect it from the power source. If your water heater is electric, stop the power at the main breaker. If gas powers it, you will need to turn it off by using the knob on your tank.

Step 2: Shut Out the Cold, Bring On the Hot

Now shut the cold water valve off on the tank. Then, turn on the hot water tap at a sink. Turning on the tap helps to keep the lines open while the tank is draining.

Step 3: Attach a Hose, Drain the Tank

Take a garden hose and attach it to the drainage spot on your tank. Run the other end of the hose outside or into a bucket to catch the water and sediment because if you do not, you could need help from a water removal service to clean up the mess. Next, empty the tank by opening up the drain valve. Let the tank drain for about five minutes.

Step 4: Flush and Close

Flush the tank by opening the cold water valve to let water through. Open and close the valve several times to push out any lingering sediment. Next, close the cold water and drainage valves.

Step 5: Fill Up and Restore Power

Turn the cold water valve on and fill the water heater. Once it is full, restore power to the tank and turn off the hot water tap.
A water heater flush can remove buildup that is in your water tank. Flushing your tank involves several steps, including turning off the power, draining the tank and flushing it.

Other News

View Recent Posts