Recent Mold Remediation Posts

How To Reduce and Clean Mildew in Commercial Bathrooms

5/11/2020 (Permalink)

Hand pointing at a white wall with black mold Mold and mildew can destroy certain parts of your Greenwood Village, CO, property

How To Reduce and Clean Mildew in Commercial Bathrooms

You may think that a little bit of mold or mildew is not a big deal. Yet if you ignore the issue, the fungus will continue to spread. This, in turn, could affect the structural integrity of your commercial property. That is why you need to perform regular mildew clean of your building.
Mold and mildew are microscopic organisms that break down dead animals and plants. Mold is also used to make medicines such as penicillin. However, mold and mildew can destroy certain parts of your Greenwood Village, CO, property, including:

  • Wallpaper
  • Carpet
  • Drywall

Some molds and mildews consume the cellulose or glue in the paper backings of these items. This causes those parts of the property to break down.

Preventing Bathroom Mildew and Mold
Bathroom mold is particularly common. After all, mold requires moisture in order to grow. To reduce the surface mold and mildew in your commercial bathrooms, be sure they are properly ventilated. You can open a window or install a fan to remove wetness in the air. Keep the bathrooms as clean and dry as possible to reduce the amount of mold and prevent the need for a mildew clean.
Poorly caulked bathroom windows could also allow moisture to seep into the drywall, insulation, or wood. If you are having new windows installed, make sure they are caulked properly. Moldy caulking or grout should be replaced.

Cleaning Bathroom Mildew and Mold
Before you address any mold or mildew, you must first locate the moisture that is promoting the growth of the fungus. Otherwise, the spores will keep coming back. If you are going near the affected area, be sure to wear a triple-seal respirator with a cartridge. Regular particulate or dust masks may not provide enough protection. Goggles and gloves are essential, as well. However, a more extensive mildew clean should only be performed by emergency restoration professionals.
Mildew and mold can thrive in dirty, wet bathrooms. By properly maintaining these areas, you can protect your commercial building.

Understanding Food Mold

3/7/2019 (Permalink)

Control moisture and humidity

Understanding Food Mold

It can be irritating to open your fridge or bread drawer, getting ready to make a sandwich after a long day’s work, and find both meat and bread mold. While understandably frustrating, the problem is not uncommon and is most often the result of natural causes. However, it is still beneficial to understand why it occurs, so that you may prolong and protect the life of your food products.

1. Moisture and Nutrient Balance

Fridge mold can be just as likely inside and outside the bread drawer. While each environment has different temperature settings and humidity levels, food offers spores something equally sustainable: moisture and nutrients. Though you may do everything in your power to prevent it, the fact that meat and bread both have certain characteristics means that they are prone to potential mold development.

2. Natural Versus Atypical Mold

Differentiating between natural and preventable growth is important. Bread mold and other types are likely natural occurrences; however, there is the possibility that an underlying issue is exacerbating your problem. For instance, if you notice that your bread is being affected quickly and often, you may have a persistent mold situation behind your cupboards or under your sink, depending on where your bread storage is located.

3. Mold Is Everywhere

The unfortunate truth is that fungus growth is a natural phenomenon that occurs everywhere. You may never be able to eliminate its presence from your life fully. However, utilizing preventative measures, such as moisture control, can prevent infestations and mold development.

4. Prevention Through Preparation

A mold remediation specialist in the Cherry Hills Village, CO, area can assess your property for potential risks and help you come up with a prevention plan. These experts are likely IICRC certified and understand fungus prevention and remediation.

Bread mold and other food spores are normal and natural. While frustrating, there is not much that can be done, unless there is an underlying issue that is perpetuating rapid mold development. You can call an expert to help you assess your property and take preventative steps.

Is Mold Damage Covered by Homeowners Insurance?

1/25/2019 (Permalink)

Mold job in Englewood, CO

Discovering mold in your home can be stressful. Not only are there concerns about safety and unsightliness, there are quickly worries about the cost of mold removal. One of the most obvious concerns is how much of the cost will be covered by homeowner’s insurance - and how much you’ll have to foot yourself. If you’re a Englewood, CO, homeowner worried about whether insurance will help you combat fungus growth, read on for answers.

Costs of Mold Removal

Mold removal itself is no small task. There’s air quality testing, potential removal of damaged goods and even more to consider. In fact, experts suggest the cost of a visit from a mold remediation specialist alone at up to $6,000. Some of the expenses to consider when deal with mold are:

  • Inspections
  • Air quality tests
  • Remediation
  • Restoration

It’s a lot to consider and often a highly unexpected expense. Just how much of this will your homeowners policy cover?

What IS Covered

In general, the average homeowner’s policy will pay for mold damage caused by a “covered peril,” that is, any event that is already covered in the policy. Such perils typically include fire, lightning and in some cases vandalism.

What Is NOT Covered

Unfortunately, the list of circumstances in which fungus growth is not covered is long. If mold resulted from a preventable water leak, for instance, your policy won’t likely pay out. The same is true of high humidity or flooding, which is often covered only under separate flood insurance.

Moreover, if there’s proof that maintenance neglect triggered mold, insurance adjusters balk at paying out. That means if a room was left overly humid and mold grew, it would be on you to pay for it.
Don’t wait until you’re facing active fungus growth the learn whether you’ve got mold coverage. Call a mold specialist today to learn more about mold insurance.

Simple Ways To say Goodbye To That Nasty Mold Odor

9/14/2018 (Permalink)

Ridding your home of a moldy musty odor can be DIY.

There are many reasons why you want to avoid getting mold in your home. Aside from its unsightly appearance and the embarrassment that comes from discovering it, mold leaves an unpleasant, sometimes-intolerable musty odor. You shouldn’t have to live with the stench in your Englewood, Colorado home.

Luckily, you can take action and get your place smelling fresh once again.

Why It Stinks

First, it may be helpful to understand why the musty, damp odor of mold is so severe and how this happens. Simply put, mold releases a number of mycotoxin materials, which create the horrible smell. Here are other reasons:

  • The smell is a mixture of numerous chemicals the mold releases as it grows.
  • The smell comes from compounds such as geosmin, borneol, 3-octanone and others.


If you head to your local grocery store or department store, you should be able to find air fresheners capable of overpowering the smell the various mycotoxin compounds. Febreze is a popular choice among homeowners. However, be aware that the products will only mask the odor for a time; eventually, the mold stench will prevail. These products don’t eliminate the mold.

Home Made

If you don’t think a commercial product will do the trick, or if you’d rather try something different, you may already have some items in your home that will work. One common combatant is the water-vinegar mixture. Try a half-part of each and put it into a spray bottle. Then, spray on the mold damaged area.

The Experts

In worst-case scenarios, you may need mold remediation to rid your home of this terrible smell. A professional mold cleanup company can use specialized chemicals or may even tear out and replace drywall or flooring in your home.

Mycotoxin compounds leave a musty odor you don’t want to deal with. Try these techniques to ensure you can have a stench-free home.

What To Do If You Have Mold In Your Englewood Colorado Home

9/1/2018 (Permalink)

An Englewood East home with mold damage.

From time to time mold will begin to grow indoors, in homes and businesses. Due to the problems, it is essential to remove it immediately. Mold must be identified by a qualified Environmental Hygienist for proper treatment. An Environmental Hygienist is a scientist trained to asses and contain hazardous substances. These individuals will be familiar with the types of problems an area is prone to and how best to handle the situation. Once a fungus outbreak has happened the home owner should immediately contact a hygienist to schedule an assessment.

In Englewood CO, mold is a problem. Fungus will feed on surfaces such as drywall, wooden joists, studs, cardboard, and clothing. It will thrive in areas that are warm, damp, and humid. The way it reproduces is to make spores, microbial growth, which can spread throughout a structure in as little as 48 to 72 hours. In Englewood and Littleton Colorado, basements are a common space with the perfect conditions for growth. Water is essential for microbial growth. Cleaning any water damage as soon as a leak is discovered will help in the prevention of further growth. If mildew growth is discovered, it should be cleaned immediately with a commercial cleaner and a scrub brush to stop the growth before it turns into a huge problem. Mildew left untreated will quickly turn into a colony.

Here are some tips for cleaning damage:

  • Fix leaks immediately and dry all items thoroughly.
  • Scrub moldy area with detergent and water, then dry completely.
  • Porous materials should be professionally cleaned, but be warned this may not always prevent them from having to be replaced depending on the extent of the damage.
  • Avoid exposure by wearing a respirator (N-95 style), gloves that cover up to the forearm, and goggles to prevent spores from getting in the eyes.

If the problem is in several locations, has spread to the heating, ventilation, and air conditioning (HVAC)system, or involves sewage or other contaminated water, it may be best to contact a professional who is familiar with treatment of moldy areas to ensure proper handling. Attempting to handle these issues without training, could lead to much bigger problems down the road.

For cleanup to be considered successful, the area must be free from visible as well as any smell associated with the infestation. All signs of water leaks or damage must be fixed, cleaned, and completely dry. The area must be safe for occupancy, with no health issues or physical symptoms present. Even dead spores can trigger allergies in certain individuals, therefor, the colony must be removed, not simply killed. Surface samples can be taken to ensure cleanup has been properly completed. A Environmental Hygienist, specifically trained in sampling protocols, methods, and interpreting results should be used for this type of testing.

Unfortunately, Englewood and Littleton CO, are susceptible to colony growth. Once discovered, immediate action is essential for quick handling, cleanup, and recovery. Anyone looking for more information pertaining to Colorado specific fungus should visit.

Visit for more information on mold damage.

What Are Those Funny Spots on My Wall?

6/27/2018 (Permalink)

Suddenly recognizing signs of mold growing in your home is a startling and unpleasant event. Our reaction is not usually very positive. We've all heard about the dangers to our health of living around such microbial growth. People often experience allergic reactions and asthma, along with other issues with the respiratory system. Such illnesses have proved debilitating over long terms with some people.

If you do notice stains in your house that make you wonder if they are the indication of microbial growth, it is important to educate yourself about the growth. One thing you will learn is that spores of these types are everywhere - you cannot eliminate them. The best you can do is not allow them to find a cozy spot in your home. You will ultimately need the help of some specialists to definitively identify the growth and determine whether you have a truly dangerous blight as well to help you with proper clean-up and restoration. Fortunately, mold remediation experts are available in the Englewood and Littleton, Colorado areas.

These growths appear in many different colors. If you smell a musty odor or see spots you may be living with a health risk. Typically, poor ventilation along with high humidity is a friend of fungus production. It can appear just about anywhere as it is able to grow on almost any inadequately ventilated surface that also receives some moisture. You may encounter it on paper, wood, carpeting, ceiling tiles and food. It's crucial that you not only remove the growth but also track down and eliminate its causes. Start your quest by reading about mildew and fungus. As you educate yourself, you'll find that you really should engage the services of a professional Environmental Hygienist consultant and a Mold Remediation contractor. The Department of Homeland Security makes a recommendation for seeking such professional help.

What Do I Do Now?

First, you should be aware that not all microbial growth is mold. It takes an expert to sort this out for you. Although you can see and smell mildew, and therefore believe you can identify it, you may not do so correctly. In that case, you could expend a lot of energy on a clean-up that wasn't absolutely necessary. If what you determined to be dangerous was really a harmless growth, you might have been able to save yourself the stress of major clean-up by simply engaging an Environmental Hygienist to classify the growth that you see and give you proper information on professionals in the Englewood and Littleton Colorado areas who could help you.

After having your growth professionally identified, whether it turns out to be fungus or mildew, you will be able to determine the extent of the health risks and property damage you may be facing. At this point, you can decide how to move forward. Of course, you can find instructions for do-it-yourself methods of clean-up. Be prepared for wide-ranging rules, purchases of supplies, hard work, much inconvenience and an end result of not being 100% certain you have successfully removed the dangers which can still lurk behind the walls. A well-researched company that specializes in mold removal is your best bet for long-term peace of mind. Visit for more information on mold remediation.

A Sparkly Clean Machine… Without the Mold

5/13/2018 (Permalink)

Laundry is likely a routine item on your to-do list, and it’s something many of us do without giving it a second thought. Could this mundane task be giving your Englewood, CO home trouble? One hidden part of this chore involves mold growth. Your washing machine could have an intruder lurking — one that is causing that unpleasant odor and those unappealing colorations on your appliance. Follow the steps below to ensure your machine is clean and mold-free.

1. Scrub, Scrub, Scrub

The first step may seem apparent, but it can be easy to forget about the needs of a washing machine once it's done its job. Plus, it may not occur to most of us that a machine that involves soap and a rinse cycle needs regular cleaning. Without maintaining your machine, fungus can develop, and the mold smell has a way of lingering. Pay attention to grime buildup in sneaky spots and clean them right away. Perhaps a regular cleaning routine is all your machine needs to stay mildew-free.

2. Consider Your Detergent

That laundry detergent might have been the best deal at the grocery store, but is it best for your washer? No matter how much dirty laundry has piled up, it is essential that you use the appropriate detergent for your type of machine. For example, front-loaders generally require detergents specifically suited for high-efficiency appliances. The incorrect detergent for your machine may leave a residue that creates an environment where mold can thrive.

3. Keep Things Dry

After you’ve pinpointed what type of detergent is best for your appliance, the main focus should revolve around keeping your washer dry. Avoid letting the drum of your machine stay damp for hours or days on end; instead, remove finished laundry immediately and keep the door open after the completion of a cycle.

Making sure your washing machine stays clean and dry between uses can work wonders when it comes to keeping your clothes smelling fresh. Taking these steps will make it less likely that fungus can grow and thrive and cause a mold smell to develop. Visit for more information on mold

3 Fast Facts About Mold

4/23/2018 (Permalink)

Mold in a residential home.

After flooding affects your Englewood, CO commercial property, you may be facing issues such as standing water, soaked office equipment and stained walls and ceilings. While these may be troubling, the development of black mold after flood waters recede can be even more serious. Although it is wise to leave its cleanup to a qualified flood and mold removal and restoration company, knowing a few basic facts about mold may help you fight it more effectively after a flood.

1. Flooding Creates Ideal Conditions for Mold Growth

After a flooding event, water vapor in the air raises humidity levels in affected areas, which can encourage the rapid growth of mold. Flooded rooms that are both warm and humid can be especially vulnerable, as fungi tends to thrive in these conditions. If you discover a moisture problem in any rooms after flooding, you may want to ask your flood technicians to check for mold.

2. There Are Different Species of Fungi

You may encounter different kinds of mold after a flood, and knowing how to identify them to your flood techs may help expedite the mold cleanup process. Dark green mold is most often found on wet carpeting or fabric. Penicillium mold is usually light green or white and might be found on wet ceilings and walls. Stachbotrys, or black mold, is one of the most common types of fungi that might appear after a flood and is typically dark and slimy. While it is helpful to know what type of mold you are dealing with, its cleanup is best left to professionals.

3. Mold Creates an Odor

You may be able to identify mold by its odor. Even if fungi are not visible, when it spreads within interior walls or under cabinets, it releases a substance called mycotoxin. This chemical releases an unpleasant, dirty smell that may help you identify its presence.

Flooding in your Englewood, CO can cause the rapid growth of black mold and other fungi. Knowing what causes them to spread and how to identify mold may help you to act quickly in seeking professional mitigation and restoration. Visit for more information on mold. 

What Type of Mold Is Growing in Your House?

3/26/2018 (Permalink)

One of the ways we make sure we can mitigate the damage to your home is to make sure proper containment barriers, such as the one you see in this pict

There are many different types of mold that can grow in your house in Englewood, CO. Mold growth is much more common than you may think, especially in areas of high humidity where water damage may have occurred. In all cases, the mold should be remediated. Here are some common types of mold typically found in the household.

1. Cladosporium

Usually green in color, Cladosporium can be found hiding under upholstery or floorboards. This mold can grow inside or outside in hot or cold climates and tends to grow on wood and fabric.

2. Aspergillus

Aspergillus is a very common mold and can be found anywhere where there are high levels of dampness. It can grow into thick layers quickly if not dealt with in time. Aspergillus can appear in a variety of colors as there are many species of this type of mold growth.

3. Penicillium

Penicillium will appear blue or green in color and is often found in areas of high water damage, typically in areas such as carpet and wallpaper. This fungus usually will have a fuzzy appearance to it.

4. Alternaria

Alternaria is a fast-growing mold that is extremely common. It usually appears as dark brown or black in color and fuzzy in texture. Under sinks, in window frames, or in showers are some of the frequent areas this mold is found.

5. Stachybotrys

Stachybotrys, frequently referred to as “black mold,” is typically black, slimy, and smelly. Black mold usually grows on wood, paper, or cardboard in areas that have experienced prolonged periods of water damage.

Mold can be difficult to locate and even harder to remove. If you suspect mold growth may be an issue in your home, consider talking to a professional to locate and remove the problem. Professional removers have specific training and equipment for the remediation of mold to ensure that it is taken care of for good. Always stay on top of it—mold grows fast and can spread to places you may not think of. Visit for more information on mold. 

Signs, Symptoms and Causes of Indoor Mold Growth in Commercial Spaces

2/19/2018 (Permalink)

Indoor mold growth due to moisture is a common issue for many businesses in Englewood, CO whether it is caused by broken pipes or broken supply lines, high humidity levels or storm-related flooding events. To protect your property, you should know these key factors in recognizing risks and some methods to prevent mildew and address fungal infestations.

Sources of Indoor Mold

Mold and mildew are propagated through tiny, microscopic spores that are ubiquitous in both indoor and outdoor spaces. Moisture and oxygen are all that are required for these fungal invaders to take foothold on nearly any surface that contains an organic nutrient source. This includes food, paper and wood as well as building materials like insulation, drywall and carpeting. While major flooding events are one major source of mold issues, small leaks and even high humidity can be enough to create an ideal environment for growth.

Risk Factors

When it comes to minimizing the spread of aggressive mildew or mold strains, early detection is essential. While mold can take hold nearly anywhere in a building, these are common areas to inspect for visible signs:

• Tile grout and wallpaper seams
• Window sills
• HVAC drip pans
• Ceiling corners
• Wall switch plates

Additionally, any areas that show evidence of water damage should be monitored carefully. In many cases fungal colonies grow behind the scenes, whether behind wallpaper or tiling or within insulation and drywall, rotting structural elements from the inside out.

Remediation Processes

Whether you only notice a distinctive musty smell or your building is having issues with water damage from broken pipes or flooding, it is important to contact a professional mold remediation company as soon as possible to minimize restoration complications and costs. These trained specialists will be able to quickly assess the extent of damage, remove standing water, identify strains of mold or mildew present and perform thorough dehumidification of affected spaces to eliminate all residual moisture.

Visit for more information on mold.

The Benefits of Professional Mold Remediation Services

8/16/2017 (Permalink)

The Benefits of Professional Mold Remediation Services

Mold damage can pose serious damage to a home or commercial building. Although most homeowners and commercial building managers may choose DIY dry rot or mold removal projects to get rid of the mold in a home or commercial mold damage removal, it's prudent to leave it to the professionals. Here are the benefits of hiring a professional mold removal company to help you deal with the black mold growth damage issue on your property or mold growth behind a wall:

Playing Detective

Mold can regrow, and mold removal companies have the right skills and tools for investigating where the black mold in the home or the commercial mold damage started from before they commence the mold growth mitigation process. Getting rid of dry rot, black mold, fungus or mildew requires that you deal with the damage by identifying the root cause. After all, what good is removing mold growth from your property if you don't address the root cause? Mold growth behind a wall can be effectively eliminated by the professionals.

Licensed and certified mold damage mitigation company

There are several black mold removal handy-men in every neighborhood who claim to be a professional mold removal service providers with trucks and a few tools. These uncertified black mold remediation service providers might not get the job done right the first time. The best option is to hire professionals who are certified by the IICRC in Applied Microbial Remediation and licensed to offer mold mitigation services and remove black mold behind wall in your locality.

Experience in mold damage

Dealing with mold in a home or commercial mold damage and executing complicated deodorization projects to get rid of smelly odor and dry rot is not an easy task, especially for first-timers. Instead, you should hire professional dry rot and mold growth remediation service providers with years of experience in handling various types of mildew, mold, and fungus remediation projects. If the black mold remediation project is carried out haphazardly with people who don't have experience, it can cause the mold to multiply.

Tools and equipment

The professional mold restoration company has the right equipment and techniques of carrying out mold growth mitigation projects. They have state-of-art equipment or technologies that are too expensive for a homeowner or commercial building owner to invest in just for the purposes of a one-time dry rot or mold cleanup project. In fact, it doesn't make sense for anyone to buy the complicated deodorization equipment for removing mold in home or handling a commercial mold damage issue.

Moreover, the professional mold restoration company has the right protective gear necessary for removing mold growth behind the wall and carrying out hazardous deodorization tasks to clear smelly odor. It isn't necessary for you and your family or the occupants of a commercial building to be handling the chemicals used during the deodorization and mold mitigation projects.


Different types of mold, fungus, and mildew have various growth cycles and color patterns. It's not easy to remove the black mold and get rid of the fungus or mildew from a commercial building or home as thoroughly as professionals from a mold restoration company can do. If the deodorization process and the removal of fungus, mildew, and the smelly odor are not done extensively, the home or commercial building may regrow even after the mold remediation project has been completed. Agitating an area of mold can send microscopic spores through the air and spread the mold throughout the commercial building or home. Therefore, hiring a professional mold restoration company to remove the smelly odor and the mold growth behind a wall carefully will help reduce the chances of spreading the mold, fungus, or mildew.
Visit for more information on mold.

What You Should Know About Professional Mold Removal

7/21/2017 (Permalink)

What You Should Know About Professional Mold Removal

Mold infestation is a common menace among property owners and in homes. Individuals who own properties, proprietors, homeowners are becoming aware of the need for mold remediation. Mold is a type of fungus that has some benefits in the pharmaceutical industry although it can be destructive when it infests your home or office. Prevention is always better when dealing with mold in a home or dry rot compared to remediation. The most common mold growth experienced is the black mold. When a victim of the mold seeks professional services in mold removal, he or she will be able to prevent a commercial mold damage. The most common form of infestation is the mold growth behind a wall. Remediation from the fungi responsible for mold growth is necessary for managing molds and preventing a commercial mold damage.

The mold removal involves a restoration process that involves taking the following general steps.
i. Emergency contact
The first step in the mitigation of mold damage is seeking the immediate services of a restoration company. The mold removal process begins once a person notices mold damage in his/her property. A sight of the black mold or mold growth behind a wall should motivate an individual to contact his/her local restoration company. It is worth noting that mildew or a smelly odor is also a sign of mold in a home. Businesses can avoid a commercial mold damage by using a company with experience in the mitigation of black mold menace.

ii. Inspection and assessment of mold
The restoration company carries out an inspection to assess the extent of fungi and mildew infestation. It will involve assessing the damage by looking at the mold growth behind walls. Black mold is the main cause of mold damage. The levels of mold damage determine costs of its removal. Restoration company experts will observe the extent of fungi infestation using specialized equipment. The restoration company ensures that during an inspection, it does not disturb the mold as it spreads mold spores.

iii. Mold containment
During a mold removal, it is important for the restoration process to involve containment of the mold. It is important for mold containment to ensure mold spores are not scattered. To keep it at bay, you have to turn off air conditioners or heaters. In the case of an excessive spread of mold, the infested house may even lose its value.

iv. Air filtration
The experts will use specialized equipment to capture suspended fungus and mildew spores through an air filtration process. The capture of molds in home ensures that future mold development and spreading will not occur. The restoration company can also use deodorization to ensure that they address the smelly odor associated with black mold.

v. Removal of mold infested properties
After the air filtration process, the expert isolates the items infested with fungus, mildew, or black mold. Mold growth can easily spread from infested items to the ones that are clean. The use of deodorization can remove the smelly odor resulting from fungus, mildew or black mold growth behind a wall. Dry rot can lead to future mold growth leading to mold in homes or commercial mold damages. Isolating the items will help to mitigate the mold damage.

vi. Cleaning of items
Cleaning will address the mold problem in your home and ensure the mold growth behind a wall is mitigated. Removal of mold behind doors and the dry rot save money compared to purchasing new items. Eliminating the smelly odor on the property through deodorization and removing fungus and mildew traces are crucial stages of the mold removal process. The mitigation process helps to contain the mold damage to protect the property owner from suffering a commercial mold damage.

vii. Restoration
The restoration professionals should address mold growth and avoid dry rot through mitigation measures. The remediation process should also ensure that moisture is not available to promote mold growth behind the door. Remediation of carpets is done through deodorization to eliminate any smelly odor.

Mitigation measures should be the primary focus in the prevention of a commercial mold damage and reduce the spread of mold in homes. Deodorization is equally necessary for eliminating the smelly odor caused by mold in homes and offices. Visit for more information on mold.

How to choose a Mold Removal and Remediation Company

6/20/2017 (Permalink)

How to choose a Mold Removal and Remediation Company

Undetected water damage or floods can cause serious residential and commercial mold damage. Dealing with smelly odors and a mold in home situations can be quite tricky, especially for first-timers who have never cleaned up systemic mold damages.

In order to avoid further spread of mold spores or/and regrowth of fungus and mildew, a home owner or manager of the affected commercial building should hire experienced mold mitigation experts. Once the water damage is isolated enough it can warrant remediation that can only be executed by professionals who have the right gear for carrying out the deodorization process and eliminate the smelly odors. Here are tips on how one should go about hiring the right mold mitigation professionals with years of experience in offering mold removal services in his or her locality:

Experience in mold damage mitigation

A property owner should hire a mold removal company with professional contractors with years of experience in offering mold removal services. Consider hiring a reputable company with workers who are well-trained to inspect and remove mold. Homeowners should steer clear of handy men who drive around in the neighborhood with a few tools and claim to be legitimate mold mitigation professionals. Established companies should have a physical address and good reputation.

Insured and licensed in commercial mold damage

Best business practices require that property owners deal with insured and licensed mold commercial mold damage mitigation companies who can execute deodorization projects and remove smelly odors. A credible company must ensure that its workers are insured and licensed so as to avoid transferring liability to their clients in case of any accidents when dealing with hazardous chemicals, fungus, and mildew.

Homeowners should avoid falling into the trap of cheaper options of uninsured contractors who might end causing more problems than the mold damage. One should check with the relevant bodies in the local municipality to ascertain that the contractors are licensed to offer mold remediation services and remove smelly odors in the locality. In fact, a homeowner should make sure that the insurance and license is specifically for a mold removal contractor so as to avoid future loopholes in case of lawsuits or legal redress.


A homeowner should get referrals from close friends and family members who have used mold remediation services in the recent past. One can also go an extra mile and read as many testimonials as possible from previous clients to see whether they are satisfied with the services of the potential candidates. A credible commercial mold damage restoration company will not hesitate to give out contacts of its previous clients or show a portfolio of its previous projects to potential clients where it successfully removed mildew and fungus. One can also read reviews on various forums on online platforms and local magazines that analyze mold restoration companies in their locality, that are best known for removing mildew and fungus completely.

Observations of safety precautions

Furthermore, area containment after deodorization is very critical. One should ask his or her potential candidates whether they take the time to contain the area using plastic sheeting at the entrance to the site to avoid cross-contamination. Negative air machines ought to be HEPA-filtered and exhausted away from the site.

It's important to make certain that the contractors from the mold in homes Restoration Company have modern equipment and protective gear. Reputable companies always ensure that employees have hazmat suits, safety glasses, gloves, and respirators when executing deodorization and remediation projects. A property owner should assess the company's waste disposal procedures to ensure that they align with the set standards of regulatory bodies like OSHA.

Evaluation and estimates

Legit companies for removing mold in homes will give its clients a free estimate. Remember, it's always vital for the homeowner to hire a mold damage remediation company that will engage an industrial hygienist in conducting testing before initiating the mold in the home restoration process. One shouldn't be afraid to ask the right questions confidently so as to get good value for his or her money.
Visit for more information on mold removal.

The Process of Mold Remediation and Removal

4/21/2017 (Permalink)

The Process of Mold Remediation and Removal

Mold is a very difficult and dangerous substance if it is allowed to gain a foothold and grow. It originates from a tiny spore that floats through the air, and when it lands under the right conditions, it grows very rapidly until it becomes a problem.

It is a microbial growth that begins in a minuscule manner yet can cover an entire wall and ceiling in a matter of weeks. Mildew and fungus can sometimes be mistaken for mold, and it takes an expert such as an environmental hygienist to be able to tell the difference.

The substance can grow very rapidly and in turn, will expel new spores as it grows. Mold needs a place to grow that is dark, has a supply of moisture and has no moving air. So, places like attics, basements, crawl spaces, bathrooms (behind walls), and other similar locations are all ripe for the substance to take hold and grow.

If a home or business owner suspects mold, they should avoid attempting to get rid of it because that in itself can be dangerous. The spores will spread very rapidly if it is disturbed, rubbed, or otherwise molested in any way. It has roots that grown down into just about any substance but glass. Substances such as wood, concrete, cloth, and other porous or semi-porous items are perfect for its growth.

Since mildew and certain types of fungus look very similar as the insidious growth, it takes and expert such as the environmental hygienist to identify it and design a treatment for the mold cleanup and mitigation. Workers will wear protective clothing and wall off the affected area with plastic sheeting and tape to prevent spores from spreading. Spores can get into the heating and air conditioning systems in homes and businesses where they can lodge in people's respiratory systems and cause all kinds of havoc.

It is so important to proceed to have mold cleanup and mitigation as soon as it is discovered.

When the environmental hygienist discovers the microbial growth he or she will not only treat it so that it is removed from the area, they must make sure that it won't regrow. In many cases, it will require removal of the dry wall and replacement of other structures to be sure that the microbial substance never returns in the mold cleanup and mitigation process.

So if anything that looks like mildew or fungus, or any similar microbial growth, an environmental hygienist should be contacted to examine the area and begin the mold cleanup and mitigation process. Great care must be taken because it might look like fungus or mildew, but it might be mold, and the process must be handled by experts. Visit for more information on mold removal and remediation.